October 28, 2024
Safety Precautions
Removing The Engine Lifter Brackets For Detroit Diesel 71 Series Engines (271, 371, 471, 671)
1. Prepare the Engine for Lifting or Lowering
2. Loosen and Remove the Lifter Bracket Bolts
3. Remove the Lifter Brackets
Inspection of the Lifter Brackets:
Reassembly Notes
Inspection Tips
Read More
October 28, 2024
Safety Precautions:
Disassembly Steps For Removing Air Box Drains On Detroit Diesel 71 Series Inline Engines (271, 371, 471, 671)
1. Locate the Air Box Drains
2. Remove the Drain Plugs or Valves
3. Clean the Air Box Drains and Passageways
4. Inspect the Drain Plugs or Valves
Reassembly Notes
Inspection Tips
Read More
October 28, 2024
Safety Precautions:
Disassembly Steps For Removing Cylinder Block End Plates For Detroit Diesel 71 Series Inline Engines (271, 371, 471, 671)
1. Drain the Coolant and Oil
2. Remove Any Obstructing Components
3. Loosen and Remove the End Plate Bolts
4. Inspect the End Plates and Sealing Surfaces
Inspection Tips
Read More
October 28, 2024
Safety Precautions:
Disassembly Steps For The Oil System Of A Detroit Diesel 71 Series Inline Engine (271, 371, 471, 671)
1. Drain the Engine Oil
2. Remove the Oil Filter Housing
3. Remove the Oil Cooler (If Equipped)
4. Remove the Oil Pump
5. Disconnect and Remove Oil Lines and Fittings
Reassembly Notes
Inspect and Clean Oil System Components:
Reinstall the Oil Pump:
Reinstall the Oil Cooler (If Equipped):
Reinstall the Oil Filter Housing:
Reconnect Oil Lines and Fittings:
Reinstall the Oil Filter:
Refill the Engine with Oil:
Inspection Tips
Read More
October 28, 2024
Safety Precautions:
Disassembly Steps Of Flywheel & Flywheel Housing For 71 Series Inline Engines (271, 371, 471, 671)
1. Remove the Transmission (If Necessary)
2. Remove the Starter Motor
3. Remove the Flywheel Housing Cover
4. Lock the Flywheel in Place
5. Loosen and Remove the Flywheel Bolts
6. Inspect the Flywheel and Housing
Reassembly Notes
Inspection Tips
Read More
October 28, 2024
Safety Precautions:
Disassembly Steps For Detroit Diesel 71 Series Inline Camshaft & Balancer Shaft (271, 371, 471, 671)
1. Remove the Valve Cover and Rocker Assemblies
2. Disconnect the Timing Gear Cover
3. Remove the Timing Gears
4. Remove the Camshaft
5. Remove the Balance Shaft
Reassembly Notes
Inspection Tips
Read More
Page 14 of 24
« First
«
...
12
13
14
15
16
...
20
...
»
Last »
